EXHAUST PIPE REMOVAL


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY LH


    1. A01I0PZ

      Remove the 2 nuts.

    2. Remove the tail exhaust pipe assembly LH from the 2 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly.

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A01I12N

      Remove the 2 nuts.

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the center exhaust pipe assembly.

  3. REMOVE EXHAUST PIPE DAMPER


    1. A01HYGF

      Remove the 2 bolts and exhaust pipe damper.

  4. REMOVE CENTER EXHAUST PIPE ASSEMBLY


    1. A01HY3E

      Remove the 2 bolts and 2 nuts.

    2. Remove the center exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  5. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  6. REMOVE ENGINE UNDER COVER RH

  7. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)


    1. A01I12Z

      Remove the 2 nuts and No. 1 exhaust pipe support bracket (for Front Side).

  8. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01I1OP

      Disconnect the 2 wire harnesses from the clamp.

    2. Disconnect the 2 heated oxygen sensor connectors.

    3. A01HZVE

      Remove the 2 bolts and 2 nuts.

    4. Remove the front exhaust pipe assembly from the No. 1 exhaust pipe support bracket (for Rear Side).

    5. Remove the 2 gaskets from the front exhaust pipe assembly.

  9. REMOVE HEATED OXYGEN SENSOR (for Bank 1)


    1. A01I1N9E01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe sub-assembly.

      SST
      09224-00010

  10. REMOVE HEATED OXYGEN SENSOR (for Bank 2)


    1. A01I23EE01

      Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00010