EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  2. REMOVE ENGINE UNDER COVER RH

  3. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    1. A01HYHJ

      Disconnect the radiator reserve tank hose.

    2. Remove the 2 bolts and radiator reserve tank assembly.

  4. REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET (for Front Side)


    1. A01I12Z

      Remove the 2 nuts and No. 1 exhaust pipe support bracket (for Front Side).

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01I1OP

      Disconnect the 2 wire harnesses from the clamp.

    2. Disconnect the 2 heated oxygen sensor connectors.

    3. A01HXIJ

      Remove the 2 bolts and No. 1 exhaust pipe support bracket (for Rear Side).

    4. A01HXSE

      Remove the 4 bolts, 4 nuts and front exhaust pipe assembly.

    5. Remove the 3 gaskets from the front exhaust pipe assembly.

  6. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)


    1. A01HYED

      Disconnect the air fuel ratio sensor connector.

    2. Disconnect the harness clamp.

    3. A01I0DXE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold RH.

      SST
      09224-00010

  7. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. A01I10R

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly RH.

    2. A01I1OS

      Remove the gasket from the cylinder head sub-assembly.

  8. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)


    1. A01I193

      Disconnect the air fuel ratio sensor connector.

    2. A01HYJW

      Separate the wire harness clamp.

    3. A01I1GKE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold LH.

      SST
      09224-00010

  9. REMOVE NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE


    1. A01HY9U

      Remove the oil level dipstick.

    2. Remove the bolt and No. 2 engine oil level dipstick guide.

    3. A01I0E7

      Remove the O-ring from the No. 2 engine oil level dipstick guide.

  10. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01HZWL

      Remove the 3 bolts and No. 2 exhaust manifold heat insulator.

  11. REMOVE NO. 2 MANIFOLD STAY


    1. A01HZ05

      Remove the bolt, nut and No. 2 manifold stay.

  12. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH


    1. A01I0XJ

      Using a 12 mm deep socket wrench, remove the 6 nuts and exhaust manifold sub-assembly LH.

    2. A01I1H6

      Remove the gasket from the cylinder head sub-assembly.