INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) REMOVAL


  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)


    1. A01I25S

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note


      • A01I1KU

        Make sure that foreign matter, such as water, oil, sand or iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.

      • A01I0PB

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.