PURGE VALVE REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01I03M

      Hold the front of the V-bank cover sub-assembly and raise it to disengage the 2 clips on the front of the V-bank cover sub-assembly. Continue to raise the V-bank cover sub-assembly to disengage the retainer on the rear of the V-bank cover sub-assembly and remove the V-bank cover sub-assembly.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the V-bank cover sub-assembly to break.

  2. REMOVE PURGE VSV


    1. A01HY3I

      Disconnect the connector and wire harness clamp.

    2. Disconnect the 2 fuel vapor feed hoses.

    3. A01I132

      Remove the bolt and purge VSV.