FUEL PUMP ECU INSTALLATION


  1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY


    1. Connect the connector.

    2. Install the fuel pump control ECU assembly with the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. Engage the fastener.

    2. Install the luggage compartment inner trim cover LH with the 2 clips.

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01HZSME01
      Text in Illustration
      *a Pin

      Engage the pin to install the No. 1 luggage compartment trim hook.

  4. INSTALL REAR FLOOR FINISH PLATE


    1. A01HYH0

      Engage the 4 clips to install the rear floor finish plate.

    2. Install the 5 clips.

  5. INSTALL SPARE WHEEL COVER ASSEMBLY

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.