FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP


    1. A01I1V4E01
      Text in Illustration
      *1 Fuel Pump Filter Seal
      *2 Fuel Pump Spacer

      Install the fuel pump spacer onto the fuel pump.

    2. Install a new fuel pump filter seal onto the fuel pump.

    3. Apply a coat of gasoline to the fuel pump filter seal.

    4. A01HZNXE01
      Text in Illustration
      *1 Fuel Filter
      *2 Suction Filter

      Engage the 5 claws of the fuel pump.

      Note


      • Engage the claws securely.

      • Do not remove the suction filter.

      Tech Tips

      Perform "Inspection After Repair" after replacing the fuel pump assembly Click here.

    5. A01HY6V

      Engage the 2 claws of the No. 1 fuel suction support.

    6. Connect the fuel pump harness connector.

    7. A01I0RO

      Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    8. A01I1N2

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    9. Connect the connector of the fuel pump harness.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01I0JLE02

      Install the fuel sender gauge assembly by sliding it downward.

    2. Connect the connector of the fuel sender gauge assembly.

    3. Install the harness protector.

      Note

      Do not damage the wire harness.

    4. A01HYL0

      Connect the 3 harness clamps.

      Note

      Do not damage the wire harness.