HEATED OXYGEN SENSOR INSTALLATION

INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

1. 

   Text in Illustration

   *a	Torque Wrench Fulcrum Length

   Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.

   SST

   09224-00010

   Torque:

   Specified tightening torque

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   Tech Tips

   
   

   • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

   • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):

     40 N*m (408 kgf*cm, 30 ft.*lbf)

INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

1. 

   Text in Illustration

   *a	Torque Wrench Fulcrum Length

   Using SST, install the heated oxygen sensor to the center exhaust pipe assembly.

   SST

   09224-00010

   Torque:

   Specified tightening torque

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   Tech Tips

   
   

   • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

   • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):

     40 N*m (408 kgf*cm, 30 ft.*lbf)

INSTALL FRONT EXHAUST PIPE ASSEMBLY

Click here.

PERFORM INITIALIZATION

1. Perform "Inspection After Repair" after replacing a heated oxygen sensor Click here.