AIR FUEL RATIO SENSOR INSTALLATION

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

1. 

   Text in Illustration

   *a	Torque Wrench Fulcrum Length

   Using SST, install the air fuel ratio sensor to the exhaust manifold RH.

   SST

   09224-00010

   Torque:

   Specified tightening torque

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   Tech Tips

   
   

   • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

   • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):

     40 N*m (408 kgf*cm, 30 ft.*lbf)

   • Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.

2. Connect the harness clamp.

3. Connect the air fuel ratio sensor connector.

INSTALL FRONT EXHAUST PIPE ASSEMBLY

Click here.

INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

1. 

   Text in Illustration

   *a	Torque Wrench Fulcrum Length

   Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

   SST

   09224-00010

   Torque:

   Specified tightening torque

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   Tech Tips

   
   

   • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

   • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):

     40 N*m (408 kgf*cm, 30 ft.*lbf)

   • Perform "Inspection After Repair" after replacing the engine coolant temperature sensor Click here.

2. Connect the air fuel ratio sensor connector.

3. Install the wire harness clamp.

INSPECT FOR EXHAUST GAS LEAK