AIR FUEL RATIO SENSOR INSTALLATION

Tech Tips

Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A01I22XE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      Specified tightening torque
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 300 mm (11.8 in.)):

        40 N*m (408 kgf*cm, 30 ft.*lbf)

      • Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.

    2. Connect the air fuel ratio sensor connector.

    3. Engage the hose clamp.

  2. INSPECT FOR EXHAUST GAS LEAK

  3. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. Install the No. 1 exhaust manifold heat insulator to the exhaust manifold converter sub-assembly with the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }