ГЕНЕРАТОР СНЯТИЕ

Click here Click here

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

4. Click here

   REMOVE AIR CLEANER HOSE ASSEMBLY

   Click here

5. Click here

   REMOVE AIR CLEANER ASSEMBLY

   Click here

6. Click here

   REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

7. Click here

   REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

8. Click here

   REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

9. Click here

   REMOVE FAN AND GENERATOR V BELT

   Click here

10. Click here

    REMOVE FRONT FENDER APRON SEAL FRONT RH

    Click here

11. Click here

    DISCONNECT VANE PUMP ASSEMBLY

    Click here

12. Click here

    DISCONNECT OIL COOLER PIPE ASSEMBLY

    Click here

13. Click here

    REMOVE GENERATOR ASSEMBLY

    
    
    1. 

       Disconnect the generator connector.

    2. Open the terminal cap.

    3. Remove the nut and disconnect the generator wire.

    4. Remove the bolt and disconnect the wire harness bracket from the generator.

    5. 

       Remove the 3 bolts, nut and generator.

    6. Remove the stud bolt.