САЛЬНИК ПЕРЕХОДНИКА РАЗДАТОЧНОЙ КОРОБКИ ЗАМЕНА

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE TRANSFER CASE ADAPTER REAR OIL SEAL


    1. Using a screwdriver, pry out the transfer case adapter rear oil seal.

      Note

      Do not damage the surface of the oil seal press fit hole or output shaft.

      Tech Tips

      Tape the screwdriver tip before use.

  3. INSTALL TRANSFER CASE ADAPTER REAR OIL SEAL


    1. Coat the lip of a new transfer case adapter rear oil seal with MP grease.

    2. B001X20E01
      Text in Illustration
      *a Depth

      Using SST and a hammer, tap in the transfer case adapter rear oil seal.

      SST
      09223-50010
      09710-30031   ( 09710-03171 )
      Standard depth
      0 to 1.0 mm (0 to 0.0393 in.) (from edge of rear transfer adapter)

      Note


      • Keep the lip of the transfer case adapter rear oil seal free from foreign matter.

      • Do not tap in the transfer case adapter rear oil seal at an angle.

  4. INSTALL TRANSFER ASSEMBLY

    Click here