МАСЛЯНЫЙ РАДИАТОР ДВИГАТЕЛЯ УСТАНОВКА

PROCEDURE

1. INSTALL OIL COOLER SPACER

   
   

   1. Apply a light coat of engine oil to a new gasket.

   2. Install the gasket to the oil cooler spacer.

   3. Install the oil cooler spacer to the oil filter bracket with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Apply a light coat of engine oil to 2 new O-rings.

   2. Install the 2 O-rings to the oil cooler.

   3. Install the oil cooler with the 5 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

3. INSTALL OIL FILTER BRACKET

   
   

   1. Apply a light coat of engine oil to 2 new O-rings.

   2. Install the 2 O-rings to the timing chain cover.

   3. Install the oil filter bracket with the 2 nuts and 2 bolts.

      Torque:

      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

4. INSTALL NO. 1 OIL COOLER BRACKET

   
   

   1. Connect the ground wire to the cylinder block.

   2. Install the oil cooler bracket with the 2 nuts.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

5. INSTALL NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

   
   

   1. Connect the 4 hoses.

   2. Install the water by-pass hose with the 3 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

6. CONNECT COOLER COMPRESSOR ASSEMBLY

   Click here

7. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

   Click here

8. INSTALL OIL FILTER ELEMENT

   Click here

9. INSTALL FAN AND GENERATOR V BELT

   Click here

10. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

11. ADD ENGINE OIL

    Click here

12. ADD ENGINE COOLANT

    Click here

13. INSPECT FOR OIL LEAK

    Click here

14. INSPECT ENGINE OIL LEVEL

    Click here

15. INSPECT FOR COOLANT LEAK

    Click here

16. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

17. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

18. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here