ДАТЧИК УРОВНЯ МАСЛА СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  5. DRAIN ENGINE OIL

    Click here

  6. DISCONNECT OIL COOLER PIPE ASSEMBLY

    Click here

  7. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the oil level sensor connector.

    2. B001YY7

      Remove the 4 bolts and oil level sensor.

    3. B001ZQEE01
      Text in Illustration
      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    4. Remove the gasket from the oil level sensor.

      Tech Tips

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.