РАДИАТОР УСТАНОВКА

PROCEDURE


  1. INSTALL RADIATOR ASSEMBLY


    1. B001W5H

      Set the radiator bracket hooks to the radiator support holes.

    2. Install the radiator with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

    3. Connect the 2 oil cooler hoses.

  2. INSTALL FAN SHROUD


    1. Install the fan pulley.

    2. Place the shroud together with the coupling fan between the radiator and engine.

      Note

      Be careful not to damage the radiator core.

    3. Temporarily install the fluid coupling fan to the fluid coupling bracket with the 4 nuts. Tighten the nuts as much as possible by hand.

    4. B001Z2G

      Attach the claws of the shroud to the radiator as shown in the illustration.

    5. Install the shroud with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    6. Connect the oil cooler tube to the fan shroud with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    7. Pass the hose through the flexible hose clamp and close the clamp as shown in the illustration.

    8. Connect the reservoir hose to the upper radiator tank.

    9. Install the fan and generator V-belt Click here.

    10. Tighten the 4 nuts of the fluid coupling fan.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  3. INSTALL NO. 2 RADIATOR HOSE

  4. INSTALL NO. 1 RADIATOR HOSE

  5. INSTALL AIR CLEANER HOSE ASSEMBLY

    Click here

  6. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  7. ADD ENGINE COOLANT

    Click here

  8. INSPECT FOR COOLANT LEAK

    Click here

  9. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  10. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  11. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  12. CONNECT RADIATOR SIDE DEFLECTOR LH


    1. Connect the deflector with the 4 clips.

  13. INSTALL TRANSMISSION OIL COOLER AIR DUCT


    1. Install the oil cooler air duct with the 4 bolts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

  14. INSTALL FRONT BUMPER COVER

    Click here

  15. INSTALL RADIATOR GRILLE

    Click here

  16. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here