РАДИАТОР СНЯТИЕ

PROCEDURE


  1. REMOVE TRANSMISSION OIL COOLER AIR DUCT

    Click here

  2. REMOVE RADIATOR SIDE DEFLECTOR LH


    1. B001Z5W

      Using a clip remover, remove the 4 clips and radiator side deflector LH.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE NO. 1 RADIATOR HOSE

  8. REMOVE NO. 2 RADIATOR HOSE

  9. REMOVE FAN SHROUD


    1. B001VYF

      Loosen the 4 nuts holding the fluid coupling fan.

    2. Remove the fan and generator V belt Click here.

    3. B001X8D

      Disconnect the reservoir hose from the upper radiator tank.

    4. Detach the claw to open the flexible hose clamp.

    5. Remove the 2 bolts and disconnect the oil cooler tube from the fan shroud.

    6. Remove the 2 bolts holding the fan shroud.

    7. Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

      Note

      Be careful not to damage the radiator core.

    8. Remove the fan pulley.

  10. REMOVE RADIATOR ASSEMBLY


    1. B001YXF

      Disconnect the 2 oil cooler hoses.

    2. B001XFF

      Remove the 4 bolts and radiator.