ТЕРМОСТАТ ПРОВЕРКА

PROCEDURE


  1. INSPECT WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

    A01X4TE

    Tech Tips

    The valve opening temperature is stamped on the water inlet with thermostat.


    1. A01X66C

      Immerse the water inlet with thermostat in water and gradually heat the water.

    2. Check the valve opening temperature.

      Standard valve opening temperature
      80 to 84°C (176 to 183°F)

      If the valve opening temperature is not within the specified range, replace the water inlet with thermostat.

    3. A01X3RIE02
      Text in Illustration
      *1 Valve Lift

      Check the valve lift.

      Standard valve lift
      10.0 mm (0.394 in.) or more at 95°C (203°F)

      If the valve lift is not as specified, replace the water inlet with thermostat.

    4. Check that the valve is fully closed when the water inlet with thermostat is at a low temperature (below 77°C (171°F)).

      If it is not fully closed, replace the water inlet with thermostat.