УСТРОЙСТВО УПРАВЛЕНИЯ ПОДАЧЕЙ ВОЗДУХА В НЕЙТРАЛИЗАТОР (для моделей с вспомогательной системой подачи воздуха в нейтрализатор) УСТАНОВКА

PROCEDURE

1. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY

   
   

   1. Install the air injection control driver assembly with the 3 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the 4 air injection control driver connectors.

   3. Connect the wire harness clamp.

   4. Connect the ground wire with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here