КЛАПАН ПЕРЕКЛЮЧЕНИЯ ПОДАЧИ ВОЗДУХА (для моделей с вспомогательной системой подачи воздуха в нейтрализатор) СНЯТИЕ

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY


    1. Remove the exhaust manifold Click here.

  2. REMOVE INTAKE MANIFOLD


    1. Remove the intake manifold Click here.

  3. DISCONNECT NO. 1 WATER BY-PASS HOSE


    1. B001XHJE04
      Text in Illustration
      *1 No. 1 Water By-pass Hose
      *2 No. 2 Water By-pass Hose

      Slide the clip and disconnect the No. 1 water by-pass hose from the water by-pass joint and water inlet housing.

  4. DISCONNECT NO. 2 WATER BY-PASS HOSE


    1. Slide the clip and disconnect the No. 2 water by-pass hose from the water by-pass joint.

  5. DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. B001XCA

      Remove the 3 bolts and disconnect the No. 2 water by-pass pipe sub-assembly.

  6. REMOVE NO. 2 ENGINE COVER

    B001VM7

  7. DISCONNECT FUEL TUBE CLAMP


    1. B001VM6

      Disconnect the fuel tube clamp from the bracket.

  8. REMOVE NO. 1 ENGINE COVER

    B002070

  9. REMOVE FRONT WATER BY-PASS JOINT


    1. Disconnect the engine coolant temperature sensor connector.

    2. B001XZ5

      Remove the 4 nuts, front water by-pass joint and 2 gaskets.

  10. REMOVE AIR PIPE SUB-ASSEMBLY


    1. B001VKEE14
      Text in Illustration
      *1 No. 2 Hose
      *2 No. 3 Hose

      Slide the clip and disconnect the No. 2 hose from the air pipe sub-assembly.

    2. Slide the clip and disconnect the No. 3 hose from the air pipe sub-assembly.

    3. Disconnect the air pump connector.

    4. Disconnect the air pump connector clamp holder.

    5. Using a clip remover, detach the wire harness claw.

    6. B001WKI

      Remove the 2 bolts and air pipe sub-assembly.

    7. Disconnect the 2 No. 1 air hoses from the air pipe sub-assembly.

  11. REMOVE AIR SWITCHING VALVE ASSEMBLY


    1. B001WW5

      Disconnect the knock sensor connector.

    2. Remove the bolt and bracket.

    3. Disconnect the 2 air switching valve connectors.

    4. B001XLG

      Remove the 3 bolts and air switching valve assembly.

  12. REMOVE NO. 2 AIR TUBE


    1. B001ZK5

      Remove the 2 bolts, No. 2 air tube and gasket.

      Note

      Be careful not to damage the installation surface of the gaskets.

  13. REMOVE NO. 3 AIR TUBE


    1. B001YLJ

      Remove the 2 bolts, No. 3 air tube and gasket.

      Note

      Be careful not to damage the installation surface of the gaskets.