ТОПЛИВНАЯ ФОРСУНКА СНЯТИЕ

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. B001WTA

      Remove the No. 1 engine cover sub-assembly.

  7. REMOVE NO. 3 ENGINE COVER


    1. B001W6W

      Remove the No. 3 engine cover.

  8. DISCONNECT NO. 2 FUEL TUBE


    1. B001X05

      Disconnect the No. 2 fuel tube from the fuel pressure regulator Click here.

  9. DISCONNECT NO. 1 FUEL TUBE


    1. B001VVVE04
      Text in Illustration
      *A RH Side

      Disconnect the No. 1 fuel tube from the fuel delivery pipe sub-assembly RH (for metallic type) Click here.

      SST
      09268-21011
    2. B001VV4E05
      Text in Illustration
      *A LH Side

      LH Side:

      Disconnect the No. 1 fuel tube from the fuel delivery pipe sub-assembly LH Click here.

  10. DISCONNECT NO. 1 FUEL HOSE


    1. B001WQA

      Disconnect the No. 1 fuel hose from the fuel delivery pipe sub-assembly LH Click here.

  11. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH


    1. B001YAO

      Disconnect the ventilation hose and No. 6 wire harness connector.

    2. B001XS8

      Remove the 2 bolts and fuel delivery pipe sub-assembly RH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.

  12. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH


    1. Disconnect the No. 7 wire harness connector.

    2. B001XA3

      Remove the 2 bolts and fuel delivery pipe sub-assembly LH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.

  13. REMOVE FUEL INJECTOR ASSEMBLY


    1. B001Z3L

      Remove the fuel injector assembly from the fuel delivery pipe, and then disconnect the injector connector.

      Note

      B001WIO

      For reinstallation, attach a tag or label to the injector shaft.

    2. B001Z55E06
      Text in Illustration
      *1 O-Ring

      Remove the O-ring from the fuel injector assembly.

    3. B001ZMTE03
      Text in Illustration
      *A Fuel Delivery Pipe sub-assembly RH

      Detach the 3 clamps and then remove the No. 6 wire harness from the delivery pipe sub-assembly RH.

    4. B001XK5E02
      Text in Illustration
      *A Fuel Delivery Pipe sub-assembly LH

      Detach the 3 clamps and then remove the No. 7 wire harness from the delivery pipe sub-assembly LH.