ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  6. REMOVE NO. 1 RADIATOR HOSE

  7. REMOVE FAN SHROUD

    Click here

  8. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

    Click here

  9. DISCONNECT COOLER COMPRESSOR ASSEMBLY

    Click here

  10. DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. B001W3M

      Remove the 3 bolts and disconnect the 2 water by-pass hoses from the oil cooler.

  11. REMOVE NO. 1 OIL COOLER BRACKET

    Click here

  12. REMOVE OIL FILTER BRACKET

    Click here

  13. REMOVE CRANKSHAFT PULLEY

    Click here

  14. REMOVE CRANKSHAFT TIMING GEAR KEY


    1. B001XO7

      Remove the crankshaft timing gear key from the crankshaft.

  15. REMOVE FRONT CRANKSHAFT OIL SEAL


    1. B001YN9

      Using a screwdriver, pry out the oil seal.

      Note

      Do not damage the surface of the oil seal press fit hole and crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.