КОНТАКТНЫЙ ДАТЧИК ДАВЛЕНИЯ МАСЛА УСИЛИТЕЛЯ РУЛЕВОГО УПРАВЛЕНИЯ СНЯТИЕ

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER ASSEMBLY

    Click here

  6. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  7. REMOVE FAN AND GENERATOR V BELT

    Click here

  8. DRAIN POWER STEERING FLUID

  9. REMOVE FRONT WHEEL

  10. REMOVE FRONT FENDER APRON SEAL FRONT RH

    Click here

  11. REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. B001ZGP

      Disconnect the switch connector.

    2. Using a 24 mm deep socket wrench, remove the oil pressure switch.

    3. Remove the O-ring.