КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ СНЯТИЕ

Click here

PROCEDURE

1. Click here

   REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

2. Click here

   REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

3. Click here

   REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

4. Click here

   DRAIN ENGINE COOLANT

   Click here

5. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

6. Click here

   REMOVE AIR CLEANER HOSE ASSEMBLY

   Click here

7. Click here

   REMOVE THROTTLE BODY ASSEMBLY

   
   
   1. 

      Disconnect the 2 water by-pass hoses.

   2. Disconnect the throttle position sensor and control motor connector.

   3. 

      Remove the 4 bolts, throttle body and gasket.

   4. Remove the 2 water by-pass hoses from the throttle body.