BACK DOOR GARNISH(w/ Tire Carrier) INSTALLATION

PROCEDURE

1. INSTALL REAR LICENSE LIGHT COVER

   Click here

2. INSTALL LICENSE PLATE LIGHT ASSEMBLY

   Click here

3. INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   
   

   1. Pass the wire harness of the license plate light through the tail gate, and install the wire harness.

   2. Attach the 8 clips to install the No. 2 back door outside garnish sub-assembly.

      
   3. 

      Install the 2 nuts and connect the connector.

4. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

   Click here

5. INSTALL BACK DOOR TRIM COVER RH

   Click here

6. INSTALL BACK DOOR TRIM COVER LH

   Click here

7. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

8. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   
   

   1. Attach the 6 clips to install the back door outside garnish sub-assembly.

9. INSTALL REAR LIGHT ASSEMBLY LH

   Click here

10. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.