BACK DOOR GARNISH(for Double Swing Out Type) REMOVAL

PROCEDURE


  1. REMOVE ASSIST GRIP LH

    Click here

  2. REMOVE DOOR INSIDE HANDLE BEZEL LH

    Click here

  3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH

    Click here

  4. REMOVE REAR ASSIST GRIP REINFORCEMENT LH

    Click here

  5. REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY LH

    Click here

  6. REMOVE BACK DOOR SERVICE HOLE COVER LH

    Click here

  7. REMOVE BACK DOOR OUTSIDE HANDLE


    1. A01X3JM

      Detach the guide and disconnect the cable.

    2. A01XBTR

      Remove the 2 bolts and back door outside handle.

  8. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. A01X96LE01

      Detach the clamp and disconnect the connector.

    2. Detach the grommet, and then pull out the wire harness from the back door panel.

      Text in Illustration
      *1 Grommet
    3. A01X44T

      Detach the 10 clips and remove the back door outside garnish.