REAR DOOR OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR REAR NO. 1 OUTSIDE MOULDING PAD

    Tech Tips

    When installing the rear door rear No. 1 outside moulding pad, heat the rear door outside moulding using a heat light.

    Standard
    Item Temperature
    Rear Door Outside Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door outside moulding excessively.


    1. When using a new rear door outside moulding:


      1. Clean the surface of a new rear door outside moulding.

      2. Using a heat light, heat the rear door outside moulding surface.

    2. When reusing the rear door outside moulding:


      1. Using a heat light, heat the rear door outside moulding surface.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01X1JNE04
      Text in Illustration
      *a Mark-off Line

      Install a new rear door rear No. 1 outside moulding pad.


      1. Remove the peeling paper from the face of a new rear door rear No. 1 outside moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear door rear No. 1 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

        Tech Tips

        Press the rear door rear No. 1 outside moulding pad firmly to install it.

  2. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

    Tech Tips

    When installing the rear door outside moulding sub-assembly LH, heat the vehicle body and rear door outside moulding sub-assembly LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Door Outside Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body and rear door outside moulding sub-assembly LH excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install the rear door outside moulding sub-assembly LH.


      1. Using a heat light, heat the vehicle body and rear door outside moulding sub-assembly LH.

      2. Remove the peeling paper from the face of the rear door outside moulding sub-assembly LH.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Attach the 4 clips to install the rear door outside moulding sub-assembly LH.

        Tech Tips

        Press the rear door outside moulding sub-assembly LH firmly to install it.