REAR DOOR OUTSIDE MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR UPPER NO. 2 OUTSIDE MOULDING PAD

    Tech Tips

    When installing the rear door upper No. 2 outside moulding pad, heat the rear door outside moulding using a heat light.

    Standard
    Item Temperature
    Rear Door Outside Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door outside moulding excessively.


    1. When using a new rear door outside moulding:


      1. Clean the surface of a new rear door outside moulding.

      2. Using a heat light, heat the rear door outside moulding surface.

    2. When reusing the rear door outside moulding:


      1. Using a heat light, heat the rear door outside moulding surface.

      2. Remove the double-sided tape from the rear door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01X90EE03
      Text in Illustration
      *a Mark-off Line

      Install a new rear door upper No. 2 outside moulding pad.


      1. Remove the peeling paper from the face of a new rear door upper No. 2 outside moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear door upper No. 2 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

        Tech Tips

        Press the rear door upper No. 2 outside moulding pad firmly to install it.

  2. REMOVE REAR DOOR REAR NO. 2 OUTSIDE MOULDING PAD

    Tech Tips

    When installing the rear door rear No. 2 outside moulding pad, heat the rear door outside moulding using a heat light.

    Standard
    Item Temperature
    Rear Door Outside Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door outside moulding excessively.


    1. When using a new rear door outside moulding:


      1. Clean the surface of a new rear door outside moulding.

      2. Using a heat light, heat the rear door outside moulding surface.

    2. When reusing the rear door outside moulding:


      1. Using a heat light, heat the rear door outside moulding surface.

      2. Remove the double-sided tape from the rear door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01X4FWE03
      Text in Illustration
      *a Mark-off Line

      Install a new rear door rear No. 2 outside moulding pad.


      1. Remove the peeling paper from the face of a new rear door rear No. 2 outside moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear door rear No. 2 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

        Tech Tips

        Press the rear door rear No. 2 outside moulding pad firmly to install it.

  3. REMOVE REAR DOOR UPPER NO. 1 OUTSIDE MOULDING PAD

    Tech Tips

    When installing the rear door upper No. 1 outside moulding pad, heat the rear door outside moulding using a heat light.

    Standard
    Item Temperature
    Rear Door Outside Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door outside moulding excessively.


    1. When using a new rear door outside moulding:


      1. Clean the surface of a new rear door outside moulding.

      2. Using a heat light, heat the rear door outside moulding surface.

    2. When reusing the rear door outside moulding:


      1. Using a heat light, heat the rear door outside moulding surface.

      2. Remove the double-sided tape from the rear door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01WZBCE02
      Text in Illustration
      *a Mark-off Line

      Install a new rear door upper No. 1 outside moulding pad.


      1. Remove the peeling paper from the face of a new rear door upper No. 1 outside moulding pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear door upper No. 1 outside moulding pad with the mark-off line of the rear door outside moulding and install it as shown in the illustration.

        Tech Tips

        Press the rear door upper No. 1 outside moulding pad firmly to install it.