REAR DOOR OUTSIDE MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH


    1. A01XAKRE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the rear door outside moulding sub-assembly LH.

    2. A01X4AFE03
      Text in Illustration
      *a Double-sided Tape

      Using a moulding remover D, detach the 4 clips and double-sided tape.

    3. Remove the rear door outside moulding sub-assembly LH.

  2. REMOVE REAR DOOR REAR NO. 1 OUTSIDE MOULDING PAD


    1. A01X1G7

      Remove the rear door rear No. 1 outside moulding pad.