BLACK OUT TAPE(for Front Door) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • When removing the black out tape and window frame moulding, heat the vehicle body, black out tape and window frame moulding using a heat light.

Standard Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Black Out Tape 20 to 30°C (68 to 86°F)
Window Frame Moulding 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, black out tape and window frame moulding excessively.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH LH

    Click here

  4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL LH

    Click here

  5. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH

    Click here

  6. REMOVE DOOR ASSIST GRIP COVER LH

    Click here

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  8. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here

  9. REMOVE FRONT DOOR SERVICE HOLE COVER LH

    Click here

  10. REMOVE FRONT INNER DOOR GLASS WEATHERSTRIP LH

    Click here

  11. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH

    Click here

  12. REMOVE FRONT DOOR GLASS RUN LH

    Click here

  13. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY LH

    Click here

  14. REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING LH

    Click here

  15. REMOVE LOWER DOOR FRAME GARNISH LH

    Click here

  16. REMOVE FRONT DOOR WEATHERSTRIP LH

    A01X9TR

    1. Detach the 6 clips, and remove the upper part of the front door weatherstrip so that the black out tape can be removed.

  17. REMOVE NO. 1 BLACK OUT TAPE LH

    B001ZJ7

    1. Pull back an edge of the black out tape and pull it parallel to the vehicle body to remove it.

  18. REMOVE NO. 3 BLACK OUT TAPE LH

    B001WPZ

    1. Pull back an edge of the black out tape and pull it parallel to the vehicle body to remove it.

  19. REMOVE NO. 4 BLACK OUT TAPE LH

    B001Z1I

    1. Pull back an edge of the black out tape and pull it parallel to the vehicle body to remove it.