NAME PLATE(w/o Tire Carrier) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When removing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.

Standard Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Emblem 20 to 30°C (68 to 86°F)
Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, emblem and name plate excessively.

PROCEDURE


  1. REMOVE SYMBOL EMBLEM

    A01X39VE03
    *1 Protective Tape
    *2 Wooden Block
    *3 Boss

    1. Put protective tape around the emblem.

    2. Insert a piano wire between the vehicle body and emblem.

      Tech Tips

      Be careful of the boss position.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the emblem.

  2. REMOVE REAR NO. 3 BODY NAME PLATE


    1. Put protective tape around the rear body name plate.

    2. Insert a piano wire between the vehicle body and rear body name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the rear body name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the rear body name plate.

      A01X5Y4E02
      *1 for Type A, for Type B:
      *2 for Type C:
      *3 Wooden Block
      *4 Protective Tape

  3. REMOVE NO. 5 BACK DOOR NAME PLATE

    A01X4PWE02
    *1 Wooden Block
    *2 Protective Tape

    1. Put protective tape around the back door name plate.

    2. Insert a piano wire between the vehicle body and back door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the back door name plate.

  4. REMOVE BACK DOOR NAME PLATE

    A01XBY1E02
    for Type C
    *1 Wooden Block
    *2 Protective Tape

    1. Put protective tape around the rear body name plate.

    2. Insert a piano wire between the vehicle body and rear body name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the rear body name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the rear body name plate.

  5. REMOVE NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE

    A01X85RE01
    for Type C
    *1 Wooden Block
    *2 Protective Tape

    1. Put protective tape around the rear body name plate.

    2. Insert a piano wire between the vehicle body and rear body name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the rear body name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the rear body name plate.