CAUTION / NOTICE / HINT
Tech Tips
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL REAR BUMPER ARM BRACKET LH
Install the rear bumper arm bracket LH with the 2 bolts.
Attach the clamp.
INSTALL REAR BUMPER ARM BRACKET
Install the rear bumper arm bracket with the bolt.
Tech Tips
Use the same procedure for both bumper arm brackets.
INSTALL REAR BUMPER NO. 2 REINFORCEMENT
Install the rear bumper No. 2 reinforcement with the 2 bolts.
INSTALL REAR BUMPER SIDE SUPPORT LH
Attach the 6 claws to install the rear bumper side support LH.
Install the 3 screws.
INSTALL REAR BUMPER SIDE SUPPORT RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR BUMPER UPPER RETAINER LH
Attach the 2 clips to install the rear bumper upper retainer LH.
INSTALL REAR BUMPER UPPER RETAINER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
INSTALL REAR COMBINATION LIGHT ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Install the No. 2 luggage compartment side cover protector with 2 new grommets.
Install the 2 screws.
INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR BUMPER COVER
w/ TOYOTA Parking Assist-sensor System:
Connect the No. 2 frame wire connector.
Attach the 14 claws to install the rear bumper cover.
Install the 7 bolts, 6 screws and 2 clips.
Open the tail gate and install the 4 clips.
Close the tail gate.
INSTALL REAR BUMPER NO. 1 PLATE
Attach the 20 claws to install the rear bumper No. 1 plate.
INSTALL REAR QUARTER PANEL MUDGUARD LH
INSTALL REAR QUARTER PANEL MUDGUARD RH