NAME PLATE(w/ Tire Carrier) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

When removing the emblem, rear body name plate, back door name plate and rear license light cover, heat the vehicle body, emblem, rear body name plate, back door name plate and rear license light cover using a heat light.

Standard Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Emblem 20 to 30°C (68 to 86°F)
Rear Body Name Plate 20 to 30°C (68 to 86°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)
Rear License Light Cover 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, emblem, rear body name plate, back door name plate and rear license light cover excessively.

PROCEDURE


  1. REMOVE SYMBOL EMBLEM

    A01X0P4E02
    *1 Protective Tape
    *2 Wooden Block
    *3 Boss

    1. Put protective tape around the emblem.

    2. Insert a piano wire between the vehicle body and emblem.

      Tech Tips

      Be careful of the boss position.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the emblem.

  2. REMOVE REAR NO. 3 BODY NAME PLATE

    A01X6PXE02
    *1 Protective Tape
    *2 Wooden Block

    1. Put protective tape around the rear body name plate.

    2. Insert a piano wire between the vehicle body and rear body name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the rear body name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the rear body name plate.

  3. REMOVE NO. 5 BACK DOOR NAME PLATE

    A01XAY3E02
    *1 Protective Tape
    *2 Wooden Block

    1. Put protective tape around the back door name plate.

    2. Insert a piano wire between the vehicle body and back door name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the vehicle body.

      Note

      Be careful not to damage the vehicle body.

    5. Remove the back door name plate.

  4. REMOVE REAR LICENSE LIGHT COVER

    A01X7LHE02
    *1 Protective Tape
    *2 Double-sided Tape

    1. Put protective tape around the rear license light cover.

    2. Detach the 7 claws and remove the double-sided tape to remove the rear license light cover.