REAR BUMPER(w/ Towing Hitch) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Disconnect the 4 connectors.

    2. Detach the 12 clamps and remove the No. 2 frame wire.

      A01X75Q

  2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  5. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A01X9O7

      Detach the 8 claws and remove the rear bumper energy absorber.

  6. REMOVE REFLEX REFLECTOR ASSEMBLY LH


    1. A01X082

      Remove the 2 nuts.

    2. Detach the claw and remove the reflex reflector assembly LH.

  7. REMOVE REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR LOWER BUMPER COVER


    1. Remove the clip and rear lower bumper cover.

  9. REMOVE REAR NO. 2 STEP COVER


    1. A01X8MX

      Remove the 2 screws and 2 clips.

    2. Detach the 4 claws and remove the rear No. 2 step cover.