REAR BUMPER(for Standard) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 FRAME WIRE


    1. w/ TOYOTA Parking Assist-sensor System, w/o Rear Fog Light:

      Remove the No. 2 frame wire.


      1. Disconnect the 4 connectors.

      2. Detach the 12 clamps and remove the No. 2 frame wire.

        A01X75Q

    2. w/ TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Remove the No. 2 frame wire.


      1. Disconnect the 6 connectors.

      2. Detach the 14 clamps and remove the No. 2 frame wire.

        A01X3GC

    3. w/o TOYOTA Parking Assist-sensor System, w/ Rear Fog Light:

      Remove the No. 2 frame wire.


      1. Disconnect the 2 connectors.

      2. Detach the 13 clamps and remove the No. 2 frame wire.

        A01X57U

  2. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  5. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A01X9O7

      Detach the 8 claws and remove the rear bumper energy absorber.

  6. REMOVE REFLEX REFLECTOR ASSEMBLY LH (w/o Rear Fog Light)


    1. A01X082

      Remove the 2 nuts.

    2. Detach the claw and remove the reflex reflector assembly LH.

  7. REMOVE REFLEX REFLECTOR ASSEMBLY RH (w/o Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

    Click here

  9. REMOVE REAR FOG LIGHT ASSEMBLY RH (w/ Rear Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR NO. 2 BUMPER SIDE BRACKET (w/ Tire Carrier)


    1. A01X93KE03
      Text in Illustration
      *1 Rear No. 2 Bumper Side Bracket
      *2 Rear No. 3 Bumper Side Bracket

      Remove the 2 screws.

    2. Detach the 3 claws and 2 clips, and remove the rear No. 2 bumper side bracket and rear No. 3 bumper side bracket.