REAR BUMPER(for Double Swing Out Type) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR


    1. Install the No. 2 luggage compartment side cover protector with 2 new grommets.

    2. Install the 2 screws.

  2. INSTALL NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

    Tech Tips

    Use the same procedure described for the No. 2 luggage compartment side cover protector.

  3. INSTALL REAR BUMPER ARM BRACKET LH


    1. Install the rear bumper arm bracket with the 2 bolts and nut.

    2. Attach the clamp.

  4. INSTALL REAR BUMPER ARM BRACKET

    Tech Tips

    Use the same procedure for both rear bumper arm brackets.


    1. Install the rear bumper arm bracket with the bolt.

  5. INSTALL REAR BUMPER NO. 2 REINFORCEMENT


    1. Install the rear bumper No. 2 reinforcement with the 2 bolts.

  6. INSTALL REAR BUMPER SIDE SUPPORT LH


    1. Attach the 6 claws to install the rear bumper side support.

    2. Install the 3 screws.

  7. INSTALL REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. INSTALL REAR BUMPER UPPER RETAINER LH


    1. Attach the 2 clips to install the rear bumper upper retainer.

  9. INSTALL REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  11. INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL REAR BUMPER COVER


    1. Open the back doors one notch.

    2. Attach the 14 claws to install the rear bumper cover.

    3. Connect the No. 2 frame wire connector.

    4. Install the 5 bolts and 2 clips.

    5. Install the 2 bolts, 2 clips and 6 screws.

  13. INSTALL REAR BUMPER NO. 1 PLATE


    1. Attach the 20 claws to install the rear bumper No. 1 plate.

  14. INSTALL REAR QUARTER PANEL MUDGUARD LH

    Click here

  15. INSTALL REAR QUARTER PANEL MUDGUARD RH

    Click here

  16. INSTALL PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

    Click here

  17. INSTALL SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)

    Click here

  18. INSTALL SPARE WHEEL COVER SUB-ASSEMBLY (w/ Tire Carrier)

    Click here

  19. INSTALL SPARE WHEEL CARRIER HINGE BRACKET (w/ Tire Carrier)

    Click here