REAR BUMPER(for Double Swing Out Type) REASSEMBLY

PROCEDURE


  1. INSTALL REAR NO. 2 STEP COVER (w/ Towing Hitch)


    1. Attach the 4 claws to install the rear No. 2 step cover.

    2. Install the 2 screws and 2 clips.

  2. INSTALL REAR LOWER BUMPER COVER (w/ Towing Hitch)


    1. Install the rear lower bumper cover with the clip.

  3. INSTALL REAR NO. 2 STEP COVER (w/ Pintle Hook)


    1. Attach the 10 claws to install the rear No. 2 step cover.

  4. INSTALL REAR BUMPER PAD LH

    Tech Tips

    When installing the rear bumper pad, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01X5FQ

      Install a new rear bumper pad.


      1. Remove the peeling paper from the face of a new rear bumper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Align the rear bumper pad with the mark-off line of the rear bumper.

      3. Install the rear bumper pad.

  5. INSTALL REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR FOG LIGHT ASSEMBLY LH (w/ Rear Fog Light)

    Click here

  7. INSTALL BACK-UP LIGHT ASSEMBLY LH (w/o Rear Fog Light)

    Click here

  8. INSTALL BACK-UP LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR BUMPER NO. 2 SIDE BRACKET (w/ Tire Carrier)


    1. Attach the 3 claws to install the rear bumper No. 2 side bracket.

  10. INSTALL REAR BUMPER NO. 3 SIDE BRACKET (w/ Tire Carrier)


    1. Install the rear bumper No. 3 side bracket with the 2 screws.

  11. INSTALL REAR BUMPER UPPER COVER LH


    1. Attach the 4 claws to install the rear bumper upper cover.

  12. INSTALL REAR BUMPER UPPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. INSTALL REAR BUMPER ENERGY ABSORBER


    1. Attach the 8 claws to install the rear bumper energy absorber.

  14. INSTALL NO. 2 FRAME WIRE


    1. Attach the 13 clamps to install the No. 2 frame wire.

    2. Connect the 2 connectors.