FRONT BUMPER(for Standard) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips

When installing the front bumper protector, heat the front bumper surface using a heat light.

Standard Heating Temperature
Item Temperature
Front Bumper 20 to 30°C (68 to 86°F)

Note

Do not heat the front bumper excessively.

PROCEDURE


  1. INSTALL FRONT NO. 2 BUMPER PROTECTOR


    1. Clean the front bumper surface.


      1. Using a heat light, heat the front bumper cover surface.

      2. Remove the double-sided tape from the front bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01X6K1

      Install a new front No. 2 bumper protector.


      1. Remove the peeling paper from the face of 2 new front No. 2 bumper protectors.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Install the 2 front No. 2 bumper protectors as shown in the illustration.

  2. INSTALL FRONT BUMPER GUARD (w/ Garnish)


    1. Attach the 6 clips to install the front bumper guard.

    2. Install the 4 nuts.

  3. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)


    1. Attach the 2 claws.

    2. Install the front bumper extension mounting bracket with the 2 bolts.

  4. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. Attach the 16 claws to install the lower No. 1 radiator grille.

    2. Install the 4 retainers.

  5. INSTALL FRONT BUMPER HOLE COVER LH (w/ Fog Light)


    1. Attach the 5 claws to the front bumper hole cover LH.

    2. Install the 2 screws and 2 retainers.

  6. INSTALL FRONT BUMPER HOLE COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. Attach the 5 claws to the front bumper hole cover LH.

    2. Install the screw and 2 retainers.

  8. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL FRONT BUMPER INNER BRACKET (w/ Fog Light)


    1. Attach the 3 claws and install the front bumper inner bracket.

  12. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  13. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  14. INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  15. INSTALL NO. 4 ENGINE ROOM WIRE


    1. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Install the No. 4 engine room wire.


      1. Attach the 11 clamps to install the No. 4 engine room wire.

      2. Connect the 2 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Install the No. 4 engine room wire.


      1. Attach the 12 clamps to install the No. 4 engine room wire.

      2. Connect the 4 connectors.

    3. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Install the No. 4 engine room wire.


      1. Attach the 12 clamps to install the No. 4 engine room wire.

      2. Connect the 2 connectors.

  16. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  17. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  18. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  19. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  20. INSTALL HEADLIGHT CLEANER HOSE

    Click here