FRONT BUMPER(w/ Winch) REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A01X7C1

      Remove the 3 bolts and screw.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. A01X5QK

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

  3. REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY


    1. A01X50WE02
      Text in Illustration
      *a Protective Tape

      Put protective tape around the front bumper winch cover sub-assembly.

    2. Using moulding remover A, detach the 2 claws.

    3. A01WZJO

      Detach the 2 guides and remove the front bumper winch cover sub-assembly as shown in the illustration.

  4. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. A01X1YHE02
      Text in Illustration
      *A for Gasoline
      *B for Diesel

      Remove the 7 clips and upper radiator support seal.

  5. REMOVE HEADLIGHT COVER LH (w/ Headlight Cover)


    1. A01X9X1E01
      Text in Illustration
      *a Protective Tape

      Put protective tape around the headlight cover LH.

    2. A01X5UL

      Detach the 5 claws and remove the headlight cover LH.

  6. REMOVE HEADLIGHT COVER RH (w/ Headlight Cover)

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE FRONT BUMPER COVER


    1. A01XAQL

      Using a T30 "TORX" socket, remove the 3 screws.

      Tech Tips

      Use the same procedure for the other side.

    2. A01X2Y5

      Remove the 2 screws and 4 bolts.

    3. A01X628

      Remove the 3 screws.

    4. A01X86X

      Remove the 3 clips.

    5. A01X7AHE01
      Text in Illustration
      *a Protective Tape

      Put protective tape around the front bumper cover.

      Tech Tips

      Use the same procedure for the other side.

    6. A01X6TP

      Detach the 3 claws.

      Tech Tips

      Use the same procedure for the other side.

    7. A01X27Y

      Remove the front bumper cover.

    8. Disconnect the winch control wire connector.

    9. w/ Fog Light:

      Disconnect the No. 4 engine room wire connector.

    10. w/ Multi-terrain Monitor:

      Disconnect the connector.

    11. w/ Dynamic Radar Cruise Control System:

      Disconnect the connector.

  8. REMOVE FRONT BUMPER EXTENSION LH


    1. A01XA3T

      Remove the 3 bolts and front bumper extension LH.

  9. REMOVE FRONT BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A01X4BI

      Remove the 2 screws.

    2. Detach the 3 claws and remove the front bumper side support LH.

  11. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE HEADLIGHT ASSEMBLY LH


    1. for Halogen Headlight:

      Click here

    2. for LED Headlight:

      Click here

    3. for Halogen Headlight and LED Headlight:

      Click here

  13. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. REMOVE FRONT BUMPER UPPER CENTER RETAINER


    1. A01X52I

      Remove the 3 bolts.

    2. Detach the guide and remove the front bumper upper center retainer.