REAR BUMPER(for Double Swing Out Type) REMOVAL

PROCEDURE


  1. REMOVE SPARE WHEEL CARRIER HINGE BRACKET (w/ Tire Carrier)

    Click here

  2. REMOVE SPARE WHEEL COVER SUB-ASSEMBLY (w/ Tire Carrier)

    Click here

  3. REMOVE SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier)

    Click here

  4. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)

    Click here

  5. REMOVE REAR QUARTER PANEL MUDGUARD LH

    Click here

  6. REMOVE REAR QUARTER PANEL MUDGUARD RH

    Click here

  7. REMOVE REAR BUMPER NO. 1 PLATE


    1. A01X7C2E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper No. 1 plate.

    2. A01X7A3

      Detach the 20 claws and remove the rear bumper No. 1 plate.

  8. REMOVE REAR BUMPER COVER


    1. A01X3G0

      Remove the 6 screws, 2 clips and 2 bolts.

    2. A01X62X

      Remove the 2 clips and 5 bolts.

    3. Put protective tape around the rear bumper cover.

      A01X4CTE01
      Text in Illustration
      *1 Protective Tape - -

    4. Open the back doors one notch.

    5. Disconnect the No. 2 frame wire connector.

    6. Detach the 14 claws and remove the rear bumper cover.

      A01X8U7

  9. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  10. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE REAR BUMPER UPPER RETAINER LH

    A01X1WR

    1. Detach the 2 clips and remove the rear bumper upper retainer.

  12. REMOVE REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE REAR BUMPER SIDE SUPPORT LH

    A01X20I

    1. Remove the 3 screws.

    2. Detach the 6 claws and remove the rear bumper side support.

  14. REMOVE REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE REAR BUMPER NO. 2 REINFORCEMENT

    A01X1WP

    1. Remove the 2 bolts and rear bumper No. 2 reinforcement.

  16. REMOVE REAR BUMPER ARM BRACKET

    A01X0PI

    Tech Tips

    Use the same procedure for both rear bumper arm brackets.


    1. Remove the bolt and rear bumper arm bracket.

  17. REMOVE REAR BUMPER ARM BRACKET LH


    1. A01X35R

      Detach the clamp.

    2. Remove the 2 bolts and nut and remove the rear bumper arm bracket.

  18. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

    A01X8G0

    1. Remove the 2 screws, 2 grommets and No. 2 luggage compartment side cover protector.

  19. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

    Tech Tips

    Use the same procedure described for the No. 2 luggage compartment side cover protector.