STOP LIGHT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. A01XAWX

      Attach the 2 claws to install a new stop light switch mounting adjuster.

  2. INSTALL STOP LIGHT SWITCH


    1. A01X2EG

      Insert the stop light switch to the stop light switch mounting adjuster until it slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. A01X81FE01

      Rotate the stop light switch clockwise by approximately one fourth of a rotation.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    3. Check the protrusion amount of the shaft.

      Text in Illustration
      *a Protrusion Amount Measurement Area
      Standard
      1.5 to 2.6 mm (0.0591 to 0.1024 in.)

    4. Connect the connector.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here