HAZARD WARNING SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are the LHD side.

PROCEDURE


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. B001X67

      Attach the 2 claws to install the hazard warning switch.

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)

    Click here

  3. INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

    Click here

  4. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.