HAZARD WARNING SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are the LHD side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  3. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

    Click here

  6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)

    Click here

  7. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. B001X67

      Detach the 2 claws and remove the hazard warning switch.