HEADLIGHT DIMMER SWITCH INSPECTION

PROCEDURE


  1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side)


    1. w/ Entry and Start System:

      Inspect the light control switch.


      1. A01X19RE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-18 (T) - E14-15 (EL) Light control switch OFF 10 kΩ or higher
        E14-19 (H) - E14-15 (EL)
        E14-20 (A) - E14-15 (EL)
        E14-20 (A) - E14-15 (EL) Light control switch AUTO Below 1 Ω
        E14-18 (T) - E14-15 (EL) Light control switch tail Below 1 Ω
        E14-18 (T) - E14-15 (EL) Light control switch head Below 1 Ω
        E14-19 (H) - E14-15 (EL)

        If the result is not as specified, replace the headlight dimmer switch assembly.

    2. w/o Entry and Start System:

      Inspect the light control switch.


      1. A01X5DNE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-18 (T) - E14-12 (EL) Light control switch OFF 10 kΩ or higher
        E14-19 (A) - E14-12 (EL)
        E14-20 (H) - E14-12 (EL)
        E14-19 (A) - E14-12 (EL) Light control switch AUTO Below 1 Ω
        E14-18 (T) - E14-12 (EL) Light control switch tail Below 1 Ω
        E14-18 (T) - E14-12 (EL) Light control switch head Below 1 Ω
        E14-20 (H) - E14-12 (EL)

        If the result is not as specified, replace the headlight dimmer switch assembly.

    3. w/ Entry and Start System:

      Inspect the headlight dimmer switch.


      1. A01X5F3E01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-14 (HU) - E14-15 (EL) Headlight dimmer switch flash Below 1 Ω
        E14-17 (HF) - E14-15 (EL)
        E14-14 (HU) - E14-15 (EL) Headlight dimmer switch high beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    4. w/o Entry and Start System:

      Inspect the headlight dimmer switch.


      1. A01XBDOE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-11 (HU) - E14-12 (EL) Headlight dimmer switch flash Below 1 Ω
        E14-17 (HF) - E14-12 (EL)
        E14-11 (HU) - E14-12 (EL) Headlight dimmer switch high beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    5. w/ Entry and Start System:

      Inspect the turn signal light switch.


      1. A01X9EXE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-11 (TL) - E14-15 (EL) Turn signal switch neutral 10 kΩ or higher
        E14-12 (TR) - E14-15 (EL)
        E14-13 (CR) - E14-15 (EL)
        E14-11 (TL) - E14-15 (EL)

        Turn signal switch left turn

        (self cancel condition)

        		 Below 1 Ω
        E14-11 (TL) - E14-15 (EL)

        Turn signal switch left turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-11 (TL) - E14-13 (CR)
        E14-13 (CR) - E14-15 (EL)
        E14-12 (TR) - E14-15 (EL)

        Turn signal switch right turn

        (self cancel condition)

        		 Below 1 Ω
        E14-12 (TR) - E14-15 (EL)

        Turn signal switch right turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-12 (TR) - E14-13 (CR)
        E14-13 (CR) - E14-15 (EL)

        Tech Tips


        • The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).

        • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).

        If the result is not as specified, replace the headlight dimmer switch assembly.

    6. w/o Entry and Start System:

      Inspect the turn signal light switch.


      1. A01X1VXE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-15 (TL) - E14-12 (EL) Turn signal switch neutral 10 kΩ or higher
        E14-13 (TR) - E14-12 (EL)
        E14-14 (CR) - E14-12 (EL)
        E14-15 (TL) - E14-12 (EL)

        Turn signal switch left turn

        (self cancel condition)

        		 Below 1 Ω
        E14-15 (TL) - E14-12 (EL)

        Turn signal switch left turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-15 (TL) - E14-14 (CR)
        E14-14 (CR) - E14-12 (EL)
        E14-13 (TR) - E14-12 (EL)

        Turn signal switch right turn

        (self cancel condition)

        		 Below 1 Ω
        E14-13 (TR) - E14-12 (EL)

        Turn signal switch right turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-13 (TR) - E14-14 (CR)
        E14-14 (CR) - E14-12 (EL)

        Tech Tips


        • The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).

        • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).

        If the result is not as specified, replace the headlight dimmer switch assembly.

    7. w/ Entry and Start System:

      Inspect the front fog light switch.


      1. A01X9MPE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-4 (BFG) - E14-8 (LFG) Front fog light switch off 10 kΩ or higher
        E14-4 (BFG) - E14-8 (LFG) Front fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    8. w/o Entry and Start System:

      Inspect the front fog light switch.


      1. A01X2NWE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-4 (BFG) - E14-3 (LFG) Front fog light switch off 10 kΩ or higher
        E14-4 (BFG) - E14-3 (LFG) Front fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    9. w/ Entry and Start System:

      Inspect the rear fog light switch.


      1. A01X4EGE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-7 (B) - E14-8 (LFG) Rear fog light switch off 10 kΩ or higher
        E14-7 (B) - E14-8 (LFG) Rear fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    10. w/o Entry and Start System:

      Inspect the rear fog light switch.


      1. A01XBBFE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-7 (B) - E14-3 (LFG) Rear fog light switch off 10 kΩ or higher
        E14-7 (B) - E14-3 (LFG) Rear fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

  2. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side)


    1. w/ Entry and Start System:

      Inspect the light control switch.


      1. A01X7ZWE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-11 (A) - E14-16 (EL) Light control switch OFF 10 kΩ or higher
        E14-12 (H) - E14-16 (EL)
        E14-13 (T) - E14-16 (EL)
        E14-11 (A) - E14-16 (EL) Light control switch AUTO Below 1 Ω
        E14-13 (T) - E14-16 (EL) Light control switch tail Below 1 Ω
        E14-12 (H) - E14-16 (EL) Light control switch head Below 1 Ω
        E14-13 (T) - E14-16 (EL)

        If the result is not as specified, replace the headlight dimmer switch assembly.

    2. w/o Entry and Start System:

      Inspect the light control switch.


      1. A01WYW5E02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-11 (H) - E14-19 (EL) Light control switch OFF 10 kΩ or higher
        E14-12 (A) - E14-19 (EL)
        E14-13 (T) - E14-19 (EL)
        E14-12 (A) - E14-19 (EL) Light control switch AUTO Below 1 Ω
        E14-13 (T) - E14-19 (EL) Light control switch tail Below 1 Ω
        E14-11 (H) - E14-19 (EL) Light control switch head Below 1 Ω
        E14-13 (T) - E14-19 (EL)

        If the result is not as specified, replace the headlight dimmer switch assembly.

    3. w/ Entry and Start System:

      Inspect the headlight dimmer switch.


      1. A01X2ESE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-17 (HU) - E14-16 (EL) Headlight dimmer switch flash Below 1 Ω
        E14-14 (HF) - E14-16 (EL)
        E14-17 (HU) - E14-16 (EL) Headlight dimmer switch high beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    4. w/o Entry and Start System:

      Inspect the headlight dimmer switch.


      1. A01X4A8E02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-14 (HF) - E14-19 (EL) Headlight dimmer switch flash Below 1 Ω
        E14-20 (HU) - E14-19 (EL)
        E14-20 (HU) - E14-19 (EL) Headlight dimmer switch high beam Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    5. w/ Entry and Start System:

      Inspect the turn signal light switch.


      1. A01XAASE02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-19 (TL) - E14-16 (EL) Turn signal switch neutral 10 kΩ or higher
        E14-20 (TR) - E14-16 (EL)
        E14-18 (CR) - E14-16 (EL)
        E14-19 (TL) - E14-16 (EL)

        Turn signal switch left turn

        (self cancel condition)

        		 Below 1 Ω
        E14-19 (TL) - E14-16 (EL)

        Turn signal switch left turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-19 (TL) - E14-18 (CR)
        E14-18 (CR) - E14-16 (EL)
        E14-20 (TR) - E14-16 (EL)

        Turn signal switch right turn

        (self cancel condition)

        		 Below 1 Ω
        E14-20 (TR) - E14-16 (EL)

        Turn signal switch right turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-20 (TR) - E14-18 (CR)
        E14-18 (CR) - E14-16 (EL)

        Tech Tips


        • The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).

        • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).

        If the result is not as specified, replace the headlight dimmer switch assembly.

    6. w/o Entry and Start System:

      Inspect the turn signal light switch.


      1. A01XBK0E02
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-18 (TL) - E14-19 (EL) Turn signal switch neutral 10 kΩ or higher
        E14-16 (TR) - E14-19 (EL)
        E14-17 (CR) - E14-19 (EL)
        E14-18 (TL) - E14-19 (EL)

        Turn signal switch left turn

        (self cancel condition)

        		 Below 1 Ω
        E14-18 (TL) - E14-19 (EL)

        Turn signal switch left turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-18 (TL) - E14-17 (CR)
        E14-17 (CR) - E14-19 (EL)
        E14-16 (TR) - E14-19 (EL)

        Turn signal switch right turn

        (self cancel condition)

        		 Below 1 Ω
        E14-16 (TR) - E14-19 (EL)

        Turn signal switch right turn

        (cancel ratchet operation condition)

        		 Below 1 Ω
        E14-16 (TR) - E14-17 (CR)
        E14-17 (CR) - E14-19 (EL)

        Tech Tips


        • The self cancel condition indicates when the turn signal switch returns to the neutral position after releasing your hand from the switch (switch is operated within 7°).

        • The cancel ratchet operation condition indicates the condition when the turn signal switch does not return to the neutral position even after releasing your hand (switch is operated within 12°).

        If the result is not as specified, replace the headlight dimmer switch assembly.

    7. w/ Entry and Start System:

      Inspect the front fog light switch.


      1. A01XBI3E01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-2 (BFG) - E14-3 (LFG) Front fog light switch off 10 kΩ or higher
        E14-2 (BFG) - E14-3 (LFG) Front fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    8. w/o Entry and Start System:

      Inspect the front fog light switch.


      1. A01WZ1RE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-7 (BFG) - E14-8 (LFG) Front fog light switch off 10 kΩ or higher
        E14-7 (BFG) - E14-8 (LFG) Front fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    9. w/ Entry and Start System:

      Inspect the rear fog light switch.


      1. A01X54LE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-4 (B) - E14-3 (LFG) Rear fog light switch off 10 kΩ or higher
        E14-4 (B) - E14-3 (LFG) Rear fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.

    10. w/o Entry and Start System:

      Inspect the rear fog light switch.


      1. A01X8TVE01
        Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        E14-9 (B) - E14-8 (LFG) Rear fog light switch off 10 kΩ or higher
        E14-9 (B) - E14-8 (LFG) Rear fog light switch on Below 1 Ω

        If the result is not as specified, replace the headlight dimmer switch assembly.