HEADLIGHT LEVELING ECU(for RHD) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (for Static Headlight Auto Leveling)


    1. Install the headlight leveling ECU with the nut.

  2. INSTALL HEADLIGHT SWIVEL ECU ASSEMBLY (for Dynamic Headlight Auto Leveling)


    1. Install the headlight swivel ECU assembly with the nut.

  3. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for Static Headlight Auto Leveling)

    Click here

  4. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

    Click here

  5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  6. INSTALL INSTRUMENT PANEL BOX DOOR KNOB

    Click here

  7. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  8. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  9. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  11. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  12. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  13. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  14. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  16. CHECK SRS WARNING LIGHT

    Click here