BACK-UP LIGHT ASSEMBLY(for Spare Wheel Carrier) REMOVAL

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR GARNISH

    Click here

  5. REMOVE REAR LIGHT ASSEMBLY LH

    Note

    If the rear light assembly LH has removed, replace the rear light gasket LH and rear light packing with a new one.


    1. B001XHH

      Put protective tape around the rear light assembly LH.

      Text in Illustration
      B001YA8 Protective Tape
    2. B001ZUQ

      Disconnect the connector.

    3. Remove the 3 nuts.

    4. B001WIT

      Pull the rear light assembly LH toward the rear of the vehicle to detach the pin to remove it.