BACK-UP LIGHT ASSEMBLY(for Standard) INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01X4ZTE02
      *1 Component without harness connected: (Rear Light Assembly)
      *2 T/P

      Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (T/P)

      Battery negative (-) → Terminal 1 (E)

      		 Light illuminates

      If the result is not as specified, replace the rear light assembly.