BACK-UP LIGHT ASSEMBLY(for Standard) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR LIGHT ASSEMBLY LH


    1. A01X7RVE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear light assembly LH.

    2. Remove the 3 nuts.

    3. Detach the clip and remove the rear light assembly LH.

    4. Disconnect the connector.

  2. REMOVE REAR LIGHT GASKET LH


    1. Remove the rear light gasket LH from the rear light lens and body LH.

  3. REMOVE REAR LIGHT COVER


    1. A01X063

      Detach the 2 claws and guide and remove the rear light cover from the rear light lens and body LH.

  4. REMOVE BACK UP LIGHT BULB


    1. A01X1FC

      Detach the clamp.

    2. Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration and remove the socket and back up light bulb.

    3. Remove the back up light bulb from the rear light socket and wire LH.

  5. REMOVE REAR LIGHT SOCKET AND WIRE LH


    1. A01X0LA

      Disconnect the connector and remove the rear light socket and wire LH from the rear light lens and body LH.