REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY LH


    1. Attach the pin to set the rear light assembly LH.

    2. Install the 3 nuts.

    3. Connect the connector.

  2. INSTALL BACK DOOR GARNISH

    Click here

  3. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  4. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  5. INSTALL BACK DOOR CENTER GARNISH

    Click here