REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Attach the wire harness clamp and connector to install the rear combination light socket and wire sub-assembly LH.

  2. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the bulb socket.

    2. A01XBQ2E03
      Text in Illustration
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark

      Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

  3. INSTALL REAR COMBINATION LIGHT BODY GASKET LH


    1. Install a new rear combination light body gasket LH.