REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01WZ2ME01
      *1 Component without harness connected: (Rear Combination Light Assembly)
      *2 STOP

      Check the stop light.


      1. Apply battery voltage to the connector, and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 4 (STOP)

        Battery negative (-) → 6 (E)

        		 Light illuminates

        If the result is not as specified, replace the rear combination light assembly.

    2. A01WZ2ME02
      *1 Component without harness connected: (Rear Combination Light Assembly)
      *2 TAIL

      Check the taillight.


      1. Apply battery voltage to the connector, and check the LED illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 3 (TAIL)

        Battery negative (-) → 6 (E)

        		 Light illuminates

        If the result is not as specified, replace the rear combination light.