Click here

REAR COMBINATION LIGHT ASSEMBLY INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. A01X6IUE02

      Apply battery voltage to the connector and check the light illumination condition.


      1. Apply battery voltage to the connector and check the light illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → K4-6 (TL)

        Battery negative (-) → K4-3 (E)

        		 Tail light illuminates

        Battery positive (+) → K4-5 (STP)

        Battery negative (-) → K4-3 (E)

        		 Stop light illuminates

        If the result is not as specified, replace the rear combination light assembly.

        Table 1. Text in Illustration
        *a

        Component without harness connected

        (Rear Combination Light Assembly LH)
  2. Click here

    INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01X50VE02

      Apply battery voltage to the connector and check the light illumination condition.


      1. Apply battery voltage to the connector and check the light illumination condition.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → L3-6 (TL)

        Battery negative (-) → L3-3 (E)

        		 Tail light illuminates

        Battery positive (+) → L3-5 (STP)

        Battery negative (-) → L3-3 (E)

        		 Stop light illuminates

        If the result is not as specified, replace the rear combination light assembly.

        Table 2. Text in Illustration
        *a

        Component without harness connected

        (Rear Combination Light Assembly RH)